Time Nick Message 00:06 necaremus !up 88.130.60.65 30000 00:06 MinetestBot 88.130.60.65:30000 seems to be down 00:06 necaremus hmpf 00:27 necaremus ok, i think i found the problem... the port doesn't open (althou it says it is open... seems to be a problem with stupid win 10. not the only one with that prob x_X) 00:40 necaremus !up 88.130.60.65 30000 00:40 MinetestBot 88.130.60.65:30000 seems to be down 00:55 Lone-Star is there a list of required dependency files for linux to run minetest? 01:00 Emerald2 Found it. This what you were after? https://dev.minetest.net/Compiling_Minetest 01:04 Lone-Star i had that, been building MT for a while now. I had just upgraded to Mint 19.1 and had a bunch of errors about shared libraries not found, when I tried to launch 01:05 Emerald2 Ahh. That's a bit beyond me, I'm afraid. :) 01:06 Lone-Star had curl/libcurl4 pre-installed with 19, had to remove those and install libcurl3 to get it to launch 01:08 Lone-Star might be nice to have a list of packages required to run minetest on linux, just in case 01:09 Emerald2 Indeed. 01:11 Emerald2 ^ sofar 01:13 Lone-Star think i had to install i386 libraries for opengl as well 01:14 Emerald2 Wow. :o 01:15 Emerald2 Are you compiling it or getting it from the PPA? 01:15 Lone-Star building it 01:18 Lone-Star had my root hdd start failing the other day, so since i had to reinstall anyways, figured i would give mint xfce 19.1 a go. it's ok, they removed a lot of stuff though, may go back to 18.3 01:21 necaremus !up 88.130.60.65 30000 01:21 MinetestBot 88.130.60.65:30000 seems to be down 01:38 Emerald2 Ouch, Lone-Star. 01:58 Lone-Star ehh, not to big a deal. i have my /home on a separate drive, so only takes about 15 min to do a fresh install :D 02:15 sofar Lone-Star: in general, if you compile your own software, it is likely to break if you do a major OS upgrade, and you need to recompile against the latest versions of libraries installed by your OS 02:23 Lone-Star sofar: ok, good info, thanks 02:59 Emerald2 Hi gotquestion 02:59 gotquestion Modding question ... did the player's position as returned by player:get_pos() change as of 5.0.0, assuming the default player model and collision box is used? 03:03 gotquestion To be more precise, does player:get_pos() return the position at the center of the collision box? At the bottom edge of the box? Or somewhere in between? 03:03 gotquestion I've been trying to find out by trial and error but it doesn't go so well .... 03:04 gotquestion I have a bunch of code using player positions that worked for 4.16, but I'm trying to update to 5.0.0 and seem to be running into a few bugs regarding positions. 03:11 Emerald2 Ahhh. I'd answer that for you if I could. Should be somebody along soon enough who knows, though. :) 03:47 gotquestion Ok, it seems that player:get_pos() is still returning the position of the bottom edge of the collision box, same as it used to. The bug actually seems to have been already existing and somehow overlooked .... 03:49 gotquestion Anyway I think I have fixed it. I consolidated all player position handling into just a few utility functions so the calculations aren't scattered all over the place. 05:24 cimbakahn Is TELESIGHT around? 05:25 cimbakahn I tryed to connect to technoland and the server is down. 05:26 cimbakahn Does anyone know why? 05:29 cimbakahn Can someone try logging in to see if they can connect? technoland.telesight.nl 30002 05:34 swift110-phone__ Hey all 05:38 cimbakahn Can someone try logging in to see if they can connect? technoland.telesight.nl 30002 06:56 Bootywhole hellow 06:56 Bootywhole is anyone here? 06:59 Emerald2 So patient. 14:58 Ruslan1 Hello 17:06 Edgy1 anyone around? i cant seem to get rid of a code 500 serverlist issue on 5.1 17:10 BigCaballito does anyone know how to set a specific spawn point on a server 17:14 p_gimeno BigCaballito: minetest.conf -> static_spawnpoint = x,y,z 17:15 BigCaballito oh, thank you! 17:29 sfan5 Edgy1: hi 17:31 Edgy1 hi sfan5 17:31 Edgy1 sfan5, im receiving a code 500 on mt.edgy1.net 17:31 Edgy1 it moved to a new VPS and i cant announce. even tried temporarily disabling firewall 17:32 sfan5 ip of the server? 17:32 Edgy1 sfan5, 66.70.181.119 17:33 sfan5 !up 66.70.181.119 17:33 MinetestBot 66.70.181.119:30000 seems to be down 17:33 sfan5 different port? 17:33 Edgy1 yes 17:33 Edgy1 and sec 17:33 Edgy1 let me put them up 17:34 Edgy1 sfan5, ok, they are 48000, 48001, and 48002 17:34 DI3HARD139-m !up sv2.gn.krynet.pw:48001 17:34 MinetestBot sv2.gn.krynet.pw:48001 seems to be down 17:34 sfan5 !up 66.70.181.119 48000 17:34 MinetestBot 66.70.181.119:48000 seems to be down 17:35 sfan5 evidently not 17:35 Edgy1 hm 17:35 Edgy1 the servers are up but apparently they cant announce 17:35 DI3HARD139-m I have the firewall to the server off.... Hmm 17:36 DI3HARD139-m Outside of ufw 17:36 Edgy1 DI3HARD139-m, i tried disabling ufw temporarily too 17:36 Edgy1 with systemctl 17:36 Edgy1 and also tried allowing all incoming and outgoing temporarily 17:36 Edgy1 im still allowing outgoing 17:36 sfan5 they are not reachable from the internet, the announcement issue is just consequence 17:36 Edgy1 sfan5, i was able to connect before 17:36 Edgy1 and not from same network 17:37 Edgy1 wait 17:37 Edgy1 yep 17:37 Edgy1 sfan5, im connecting to the 48000 one now 17:37 Edgy1 just got in 17:37 Edgy1 !up mt.edgy1.net:48000 17:37 MinetestBot mt.edgy1.net:48000 seems to be down 17:38 sfan5 doesn't work here 17:39 Edgy1 weird 17:39 Edgy1 DI3HARD139-m, ^ 17:39 Edgy1 its allowing only the ip's it wants to allow 17:39 Edgy1 it allows my home ip but not sfan's 17:40 sfan5 you'll want to look at the output of `iptables -S` to see what the firewall is actually doing 17:41 Edgy1 sfan5, https://paste.fedoraproject.org/paste/~7-ttEiO8aZszu62xrBGPQ 17:43 BillyS Do you mind Edgy1? 17:43 Edgy1 hi BillyS 17:43 Edgy1 what? 17:44 sfan5 *looks* correct to me, but it's hard to find mistakes in machine-generated output 17:44 BillyS You sent some broadcast message 17:45 Edgy1 BillyS, ignore that, it was meant for di3hard 17:45 BillyS It blew up my editor 17:45 Edgy1 oh sorry 17:45 Edgy1 lol 17:45 BillyS Its fine 17:45 * Edgy1 gets his TNT 17:47 DI3HARD139-m !up sv2.gn.krynet.pw:48000 17:47 MinetestBot sv2.gn.krynet.pw:48000 seems to be down 17:48 DI3HARD139-m I hope I dont have to reinstall everything again due to messed up files. 17:49 Edgy1 sfan5, are you able to ping sv2.gn.krynet.pw from your location 17:49 Edgy1 and curl it? 17:50 sfan5 yes 17:50 sfan5 and yes 17:50 Edgy1 DI3HARD139-m, so, it must be the specific ports 17:52 BillyS Edgy1: Are you sure it's not a DNS thing? 17:52 BillyS Oh, nvm 17:52 Edgy1 BillyS, nope lol 17:52 BillyS yeah :P 17:52 BillyS Didn't read the backlog 17:52 Edgy1 let me make a test server. 17:53 DI3HARD139-m !up sv2.gn.krynet.pw:48000 17:53 MinetestBot sv2.gn.krynet.pw:48000 is up (87ms) 17:53 DI3HARD139-m It wanted tcp+udp 17:53 Edgy1 rly 17:53 Edgy1 hmmm 17:53 sfan5 that makes no sense 17:53 Edgy1 let me restart the servers 17:53 DI3HARD139-m Udp alone used to work 17:54 sfan5 also, the server is still down from my home connection 17:54 Edgy1 sfan5, rebooting them 17:54 Edgy1 all are now up 17:54 Edgy1 !up mt.edgy1.net:48000 17:54 MinetestBot mt.edgy1.net:48000 is up (86ms) 17:55 DI3HARD139-m They are announcing now 17:55 Edgy1 sfan5, able to join? 17:55 Edgy1 ooof 17:55 sfan5 no 17:55 Edgy1 well hmm 17:55 Edgy1 #SomeProgress 17:55 Edgy1 DI3HARD139-m, did you change all 3 ports? 17:55 sfan5 2019-03-28 18:55:33: ERROR[Main]: Connection timed out. 17:55 sfan5 when trying to join 48000 17:55 Edgy1 yea they *are* announcing 17:55 sfan5 are there any more firwalls in front of your server? 17:56 Edgy1 sfan5, what happens if you find "grand theft auto minetest" in the list and connect 17:56 sfan5 that's exactly what I did 17:56 sfan5 it is functionally equivalent anyway 17:56 Edgy1 weird 17:57 DI3HARD139-m Changed it to allow 48000:48003/tcp + /udp 17:57 Edgy1 DI3HARD139-m, what was it before 17:57 Edgy1 DI3HARD139-m, sfan5 cant get into gta at 48000 17:58 sfan5 I can't reach *any* of them 17:59 Edgy1 DI3HARD139-m, my other friend cant either. hmm 17:59 DI3HARD139-m Try using sv2.gn.krynet.pw as the address 17:59 Edgy1 ok 17:59 Edgy1 ill just test that on gta for now 17:59 DI3HARD139-m No I meant in the client* 18:00 DI3HARD139-m Sorry. Wasnt specific 18:00 Edgy1 ohhh 18:01 Edgy1 !up mt.edgy1.net:48000 18:01 MinetestBot mt.edgy1.net:48000 is up (84ms) 18:01 Edgy1 sfan5, able to connect to sv2.gn.krynet.pw port 48000? 18:01 sfan5 still no 18:01 Edgy1 hmm weird 18:02 Edgy1 DI3HARD139-m, did you reload ufw? 18:02 DI3HARD139-m Yea 18:02 Edgy1 hmm 18:02 DI3HARD139-m !up sv1.gn.krynet.pw:30005 18:03 MinetestBot sv1.gn.krynet.pw:30005 seems to be down 18:03 DI3HARD139-m Oh yeah thats udp 18:03 Edgy1 DI3HARD139-m, shall i restart it with systemctl 18:03 DI3HARD139-m Yeah. Go ahead 18:04 DI3HARD139-m @Sfan5 see if you can ping sv1.gn.krynet.pw 18:04 Edgy1 try now 18:04 Edgy1 I rebooted ufw with systemd 18:05 sfan5 DI3HARD139-m: I can 18:05 DI3HARD139-m Odd. Bother servers are in the same datacenter... 18:05 sfan5 and no it still doesn't work 18:05 DI3HARD139-m Both* 18:07 Edgy1 im making a test server and naming it meep 18:07 Edgy1 on port 48999 18:07 DI3HARD139-m If you dont mind me asking, what country are you in @sfan5? Gonna check with OVH 18:08 sfan5 Germany 18:08 DI3HARD139-m If there is a network problem or just a bad install 18:08 sfan5 I doubl it's a network problem on their side 18:08 Edgy1 sfan5, try port 48999 18:08 Edgy1 i just got in 18:09 sfan5 Edgy1: doesn't work 18:09 Edgy1 weird 18:09 Edgy1 thats a vanilla mt5.1 compile 18:09 Edgy1 with minetest_game 18:09 Edgy1 and minimal settings 18:10 sfan5 your firewalling/networking setup on your server is seriously broken 18:11 DI3HARD139-m Actually... You said you can ping sv1 so it is a broken config 18:11 Edgy1 DI3HARD139-m, no one could connect to my 48999 server either 18:11 Edgy1 yet i could 18:11 Edgy1 vanilla mt5 18:11 sfan5 DI3HARD139-m: I can also ping and curl sv2 18:12 Edgy1 recompiling 5.0 18:14 sfan5 you can save yourself the time recompiling 5.0, 0.4.17 or 0.4.16 or whatever 18:14 sfan5 it's not cause by MT 18:14 Edgy1 hmm 18:14 Edgy1 ok 18:38 Edgy1 sfan5, can u try now? 18:38 Edgy1 if this doesnt work, krynet is officially a swine 18:42 sfan5 % ./checkmt.py 66.70.181.119 48000 18:42 sfan5 66.70.181.119 seems to be down (timed out) 18:43 Edgy1 oof 19:36 kurtzmusch anyone can tell me how many light levels there are, aswell as if i can change light levels of a particular node? example: manually propagate light only in a given direction, like a spotlight would 19:37 rubenwardy there 16 light levels (0-15), but light level 15 is reserved by sunlight 19:38 rubenwardy and it's not possible to do that without hacks 19:38 rubenwardy ie: manually setting light levels 19:38 jluc hello 19:38 kurtzmusch so, i cant change the intensity of a lamp 19:39 kurtzmusch without swaping it with a lower intensity lamp 19:39 jluc my son plays with "advanced trains" - what are "ks" sort blocks ? 19:40 jluc i searched and only found "kansas" for ks 19:44 p_gimeno jluc: more context maybe? 19:47 p_gimeno where do you see this "ks"? 19:48 jluc there are blocks named "ks main signal", "ks mast", "ks shunting signal" 19:49 jluc we discover this mod and try to use interlocking system 19:54 p_gimeno I'm not sure but I bet it means this: https://en.wikipedia.org/wiki/German_railway_signalling#Kombinationsignale 19:59 jluc Ach ja ! 21:14 BigCaballito which mod has ender chests? 21:18 p_gimeno !mod more_chests 21:18 MinetestBot p_gimeno: More Chests [more_chests] by Megaf - https://forum.minetest.net/viewtopic.php?t=9495 21:18 p_gimeno ^ @BigCaballito 21:21 BigCaballito thank you 22:17 jluc thank you p_gimeno